![]() ![]() gunzip sakis3g.gzįinally, we want to make the file executable so that we can run it. The Raspberry Pi runs on an ARM processor, so this is the version we download. "The easiest way to have your 3G/UMTS/GRPS connection up and running."įirst, download the latest version. In the end, I turned to sakis - the All-In-One script for connecting 3G modem. I tried using wvdial and numerous other ways to connect to 3G. sudo apt-get install ppp If You Think I'm Sakis, And You Want My Body. In order to get our network connected, we need to install the ppp package. The dongle fits into the female USB socket. Put one male USB plug into the PI and the other into a power supply. Something like this looks like it should do the trick. ![]() Rather than use two plugs, I'm going to try to find a mains plug with two USB sockets. I also tried plugging both plugs into the Pi - that didn't work either. I used a USB Y Cable to supply power and data. The red plug goes into the mains via a 1A plug (an Amazon Kindle adapter). The black plug goes directly into the Pi for data. In the above image, you can see that the Raspbery Pi is plugged into the mains - via a 1.8A plug. A 3G signal takes more power than the Pi's USB sockets can supply. The first thing to say is use a powered USB hub! I had lots of problems getting the modem working when it was plugged directly into the Pi. Following on from getting the Raspberry Pi to send SMS. This is a bit of a brain dump of how I got a 3G USB dongle working on the Raspberry Pi. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |